Kodak DCS PRO BACK - USER'S GUIDE Manual page 70

Using the Image LCD
Zooming
With the Region of Interest box enabled
(page 69) press the OK button.
The first actuation zooms to 1:4 (one pixel
displayed for every four), the second to 1:1, and
the third returns to the un-zoomed 1:16.
"
When zoomed in to 1:1, the crosshairs
appear but the Region of Interest box does
not. You can still pan, however.
Panning
With the Region of Interest box enabled, press
the appropriate part of the Four-way switch to
move the Region of Interest box around.
If the edge of the thumbnail is reached, the image
moves in the opposite direction.
Back
Contents
Navigating Through Images in Zoom Mode
Press the Cancel button to turn the Region of
Interest box off and navigate
images.
Luminometer Crosshairs
The crosshairs, which appear when the Region
of Interest box is on, indicate the level of
luminance channel saturation of pixels below the
center of the crosshairs. This level is indicated in
stops (-3 to 3.25) and percentages (2 to 180%).
Next Index
(page 74) to other
70