Connecting The Dcs Pro Back Plus To The Camera Body And Accessories; Mamiya Interface Plate - Kodak DCS PRO BACK - USER'S GUIDE Manual

The Basics

Connecting the DCS Pro Back Plus to the Camera Body and Accessories

This section provides instructions for connecting
the DCS Pro Back Plus to the camera body, and
for connecting a lens, a flash, and an S-Video
monitor to the DCS Pro Back Plus.
For instructions on connecting the DCS Pro Back
Plus to the computer and/or power supply, refer
to the sections on using the camera connected to
the computer (page 54)
(page 60).
Contents
Back
or in portable mode
Next

MAMIYA Interface Plate

A DCS Pro Back Plus MAMIYA Interface Plate
(available from Kodak) must be attached to the
MAMIYA RZ67 PRO II camera body before
connecting the DCS Pro Back Plus.
Refer to the instructions included with the DCS
Pro Back Plus MAMIYA interface plate.
Index 34