Turning The Image Lcd On And Off; Tilting The Image Lcd - Kodak DCS PRO BACK - USER'S GUIDE Manual

About the DCS Pro Back Plus

Turning the Image LCD On and Off

Power the DCS Pro Back Plus by battery
1
(page 61) or AC Adapter
2 Press the OK button to turn the Image LCD
on.
Press the Cancel button to turn the Image
3
LCD off. If the LCD is not in Display mode,
press the Cancel button more than once.
Back
Contents
(page 55).
Next

Tilting the Image LCD

Slide the Image LCD Tilt Latch and tilt the LCD to
a 45° angle for easier viewing, if needed.
Slide the latch and gently press to return the tilted
section to its original position.
Index
23