Connecting To The Ac Adapter; Turning The Camera On And Off - Kodak DCS PRO BACK - USER'S GUIDE Manual

Using the Camera in Portable Mode

Connecting to the AC Adapter

1 Connect the cable from the included AC
adapter (page 55)
the DCS Pro Back Plus.
2 Plug the AC adapter into a wall socket.
Contents
Back
to the IEEE 1394 port on
Next

Turning the Camera On and Off

Press the Power button to turn the camera on or
off.
CANCEL
PWR
MENU
DCS Pro Back Plus
"
The button is only effective when the camera
is powered by battery. When powered by AC
adapter, the camera is always on.
The Camera Ready LED illuminates when the
power is on.
"
If you turn the camera off while the DCS Pro
Back Plus is busy, the Camera Ready LED
flashes until the task completes.
Index
OK
62