Icom IC-M73 Instruction Manual page 47

D Transmitter
• Output power:
• SAR 10g:
• Modulation system:
• Max. frequency deviation:
• Adjacent channel power:
• Spurious emissions:
D Receiver
• Sensitivity (typical):
• Squelch sensitivity (threshold):
• Intermodulation rejection ratio:
• Spurious response rejection ratio: 70 dB
• Adjacent channel selectivity:
• Audio output power (at 10% distortion with an 8 Ω load):
• IC-M73EURO
(AUS version)
D General
• Frequency coverage:
• Mode:
• Operating temperature range:
• Current drain (at 7.4 V):
(approximate)
6 W/3 W/1 W/0.5 W*
* For only the FRG version.
0.776 W/kg
Variable reactance frequency
modulation
±5 kHz
70 dB
0.25 µW
–4 dBµ emf at 20 dB SINAD
–5 dBµ emf (typical)
68 dB
70 dB
0.2 W (External)
0.7 W typical at 1 kHz (Internal)
TX 156.025–157.425 MHz
RX 156.300–162.200 MHz
FM (16K0G3E)
–10°C to +55°C
TX high 1.4 A
Max. audio 0.45 A
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
• Power supply requirement:
• Frequency stability:
• Antenna impedance:
• Dimensions (approximate):
(Projections not included)
• Weight (approximate):
D Transmitter
• Output power:
• Modulation system:
• Max. frequency deviation:
• Adjacent channel power:
• Spurious emissions (typical):
D Receiver
• Sensitivity (typical):
• Squelch sensitivity (at threshold, typical):
• Intermodulation rejection ratio:
• Spurious response rejection ratio: 65 dB
• Adjacent channel selectivity:
• Audio output power (at 10% distortion with an 8 Ω load):
All stated specifications are subject to change without notice
or obligation.
13
SPECIFICATIONS
7.4 V DC nominal (negative ground)
±10 ppm (–10°C to +55°C)
50 Ω nominal
52.5(W) × 125(H) × 30(D) mm
2.0(W) × 4.9(H) × 1.2(D) inches
280 g/9.9 oz with BP-245H
5 W/3 W/1 W
Variable reactance frequency
modulation
±5.0 kHz
70 dB
0.25 µW
–5 dBµ emf (20 dB SINAD)
–6 dBµ emf
65 dB
65 dB
0.2 W (External)
0.7 W typical at 1 kHz (Internal)
13
39