Atis Code Programming (For Only The Nld And Frg Versions) - Icom IC-M73 Instruction Manual

■ ATIS code programming (For only the NLD and FRG versions)

The 10-digit ATIS code can be programmed and confirmed
with the following operation.
The ATIS code programming is not necessary and con-
firmation can only be performed when the ATIS code has
been programmed by your dealer. The code programming
can be performed 1 time only, if the code has not been
programmed by your dealer.
1 Push [F] to enter the function mode,
and then push [▲]/[▼] to select the
ATIS code programming function.
• "ATIS ID" appears.
2 Push [H/L•LOCK] to edit the ATIS
code.
• "Id" and "ATIS" appear, and the 1st char-
acter of the code blinks.
3 Push [▲]/[▼] to select a number.
4 Push [CH/WX•U/I/C] to move to the
right; then push [▲]/[▼] to select a
number.
• Push [SCAN•DUAL] to move to the left.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
FUNCTION MODE OPERATION
5 After inputting the 10-digit ATIS
code, push [H/L•LOCK] to write
the code into the memory, then
goes to the ATIS code confirma-
tion mode.
Deleting the ATIS code (All clear):
While in the ATIS code editing mode, push [FAV•
D ATIS code confirmation
(When the ATIS code has been programmed)
1 Push [F] to enter the function mode, and then push
[▲]/[▼] to select the ATIS code programming function.
• "ATIS ID" appears.
2 Push [H/L•LOCK] to confirm the ATIS code.
• "Id" and "ATIS" appear.
• The ATIS code is displayed and
scrolls in the channel comment dis-
play.
3 Push [H/L•LOCK] to return to
normal operation.
7
Scrolls
7
] to delete.
Scrolls
23