Play Back Function (Depending On Versions) - Icom IC-M73 Instruction Manual

7
FUNCTION MODE OPERATION

■ Play back function (Depending on versions)

This transceiver has two voice recorders.
One is the manual recording function which can record for 30
seconds. The other is the automatic recording function which
can record the last 60 seconds of the receiving signal.
There are three play-back modes as follows.
• Playing back the all contents of the manual recording
Select "M-PLAY"
Playing back for 30 seconds (maximum).
• Playing back the last 30 seconds of the automatic recording
Select "LAST30S"
Not playing back.
• Playing back the all contents of the automatic recording
Select "LAST60S"
Playing back for 60 seconds (maximum).
20
Playing back for
30 seconds (maximum).
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
1 Push [F] to enter the function mode.
• "PLAY" appears.
2 Push [H/L•LOCK] to enter the play back selection mode,
and then push [▲]/[▼] to select the desired play back
mode from "M-PLAY," "LAST30S," or "LAST60S."
If there is no recorded signal in the transceiver, "BLANK"
appears.
• M-PLAY : Play back the manually
recorded signal.
• LAST30S : Play back the last 30
seconds of the automati-
cally recorded signal.
• LAST60S : Play back the automati-
cally recorded signal for
60 seconds.
3 Push [H/L•LOCK] to play back
the recorded signal.
• "PL" blinks.
• To stop the play back, push
[H/L•LOCK] again.
DO NOT detach the battery pack while
the transceiver is turned ON. Other-
wise, the data could be lost or deleted.
Deleting a recorded signal:
While selecting the desired data to
delete, hold down [FAV• ] for 3 seconds until 2 short beeps
sound.
Blinks while playbacking.
Playback mode appears.
"BLANK" appears when
the transceiver has no
recorded signal.