Table of Contents
Advertisement
INTRODUCTION
This manual contains all information required for the intended use of the equipment.
Deviation from the described intended use can result in a hazardous situation and/or
property damage.
This manual includes notes and warnings on safe operation of the equipment. These
notes and warnings are accompanied by the following icons. Read them attentively!
DANGER
WARNING
CAUTION
NOTICE
For instructions related to the configuration of an ARM SYSTEM and its integration into
a complete SFX system at an event, refer to the ARM SYSTEM Configuration Manual.
TARGET GROUP
This manual is targeted at authorised personnel in the event industry that install and
operate the ARM SYSTEM with the ARM CONTROLLER, and their supervisors.
Authorised personnel are those who:
•
Are appointed by their supervisor to install and/or operate the ARM
CONTROLLER at the event.
•
Are familiar with and able to implement the ARM SYSTEM configuration asso-
ciated with the SFX setup and the risk reduction strategy for the event.
•
Are trained in recognizing and avoiding hazards related to SFX applications
at events.
•
Are familiar with the safety instructions of each involved SFX machine.
•
Are familiar with and abide by the applicable local, national and
international laws and regulations.
LANGUAGE
This document contains the original instructions in English. In case you require other
languages please contact MAGIC FX.
4
MAGICFX
SFX SAFETY ARM CONTROLLER — User and Installation Manual
®
Indicates a hazardous situation that, if not avoided, will result in
death or serious injury. This signal word is to be limited to the most
extreme situations.
Indicates a hazardous situation that, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation that, if not avoided, could result
in minor or moderate injury.
Indicates information considered important, but not hazard-
related (e.g. messages relating to property damage).
Advertisement
Table of Contents
Need help?
Do you have a question about the SFX SAFETY ARM CONTROLLER MFX3220 and is the answer not in the manual?