Operation - Magicfx SFX SAFETY ARM CONTROLLER MFX3220 User And Installation Manual

WARNING
NOTICE
NOTICE
NOTICE
NOTICE
2.3

OPERATION

WARNING
WARNING
NOTICE
NOTICE
NOTICE
Make sure that each ARM CONTROLLER is labeled in such a way
that it's completely evident to the operator which SFX machines
are connected and, if applicable, which SFX machines are not
connected to the related ARM SYSTEM. Correct and clear
labeling reduces the chance that in an emergency situation the
operator stops the wrong machine(s), and thereby not stopping
or preventing any hazards and/or property damage.
Do not connect the ARM CONTROLLER to machines that are not
compatible with the ARM SYSTEM. Failure to do so could cause
damage to the equipment.
Do not use RJ45 cables in the ARM SYSTEM that come from any
other system than the ARM SYSTEM, carrying a different data pro-
tocol. Failure to do so could cause damage to the equipment.
Do not use more than one ARM CONTROLLER in a single ARM
SYSTEM. Failure to do so could cause damage to the equipment
and emergency stop malfunction.
Position the ARM CONTROLLER in such a way that it is readily
accessible by the operator and that it cannot be actuated
accidentally.
Using a damaged ARM CONTROLLER could lead to death, serious
injury and/or property damage. Always inspect the controller
thoroughly before operation.
Make sure that you are familiar with and comply with the instruc-
tions from the user and installation manuals of each relevant
ARM SYSTEM component and each connected SFX machine.
Make sure that you are familiar with the installed configuration of
the ARM SYSTEM on-site and its associated risk reduction strategy.
As a supervisor, only provide safety keys of the ARM CONTROLLER
to authorised personnel.
Remove the safety key and store it in a safe place when you
leave the ARM CONTROLLER unattended.
MAGICFX SFX SAFETY ARM CONTROLLER — User and Installation Manual
®
11