Table of Contents
Advertisement
3. Turn the latched emergency stop button (on the ARM CONTROLLER or an
external E-STOP) a quarter in the clockwise direction to release it. The
emergency stop button LED switches on.
4. Press the reset button to reset the system. The reset LED switches off, indicating
the system is now ready to be armed again, see Section 3.2 'Arm the system'.
3.5
DISARM THE SYSTEM
Set the safety key in the OFF position to disarm the ARM SYSTEM and disable the
operation of the SFX machines.
NOTICE
4
MAINTENANCE
To achieve the maximum service life of the ARM CONTROLLER you must regularly
clean the ARM CONTROLLER and test if it is functioning correctly.
Contact MAGIC FX if the ARM CONTROLLER is not functioning correctly.
DANGER
5
TROUBLESHOOTING
Always contact MAGIC FX if any malfunctions or errors occur that cannot be solved
with the instructions as described in this manual.
16
MAGICFX
SFX SAFETY ARM CONTROLLER — User and Installation Manual
®
Remove the safety key and store it in a safe place when you
leave the ARM CONTROLLER unattended.
Do not replace parts yourself; always consult MAGIC FX.
Advertisement
Table of Contents
Need help?
Do you have a question about the SFX SAFETY ARM CONTROLLER MFX3220 and is the answer not in the manual?