Utility Commands
Restarting the Controller < RESET command >
This command restarts the Controller.
No parameters are provided for this command.
< Command format >
or
R E S
E T
C R
< Response format >
When processing ends successfully
None
When processing fails
E R
C R
Ending Ethernet Communications < EXIT command >
This command ends the TELNET connection for Ethernet communications and disconnects the line.
No parameters are provided for this command.
< Command format >
E X
I T
C R
< Response format >
When processing ends successfully
None
When processing fails
C R
E R
ZFX-C Serial Communication Command Reference
R S
C R
About Communication Commands
29