Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 39

2-2
Select the Settings tab, and then [ASCII Setup].
2-3
Mark the following checkboxes, and click OK to complete the setting.
3
Set the communication conditions for the ZFX-C.
Set [System]-[Comm] to match the above settings.
For details on how to set the communication specifications, refer to the User's Manual.
4
Switch the ZFX-C to the RUN mode.
MENU MENU
ZFX-C Serial Communication Command Reference
ADJ ADJ
RUN RUN
Mode switch
37
Example of Usage