Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 25

Saving the Current Settings to the Controller < DATASAVE command >
This command saves the current settings to the Controller.
No parameters are provided for this command.
< Command format >
C R
D A T A S A V E
< Response format >
When processing ends successfully
O K C R
When processing fails
C R
E R
Uploading Image Data < IMGLOAD command >
Uploading image data to the Controller from an external device
This command uploads image data to the Controller by XMODEM protocol.
< Command format >
I M G L O A D 0
< File transfer >
The image data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
C R
R E A D Y
When processing ends successfully
C R
O K
When processing fails
C R
E R
< Explanation of parameters >
Save memory No. Specifies the No. of the save memory for saving the image data to. (0 to 99)
ZFX-C Serial Communication Command Reference
or
C R
S V
or
C R I L
Save
memory No.
(max. 2 digits)
0
C R
Save
memory No.
(max. 2 digits)
About Communication Commands
23