Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 23

Uploading Bank Data < BNKLOAD command >
Uploading bank data to the Controller from an external device
This command uploads the bank data to the Controller by XMODEM protocol.
< Command format >
B N K L O A D 0
< File transfer >
The bank data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
R E A D Y C R
When processing ends successfully
C R
O K
When processing fails
E R C R
< Explanation of parameters >
Bank No. Specifies the bank No. to upload. (0 to 31)
Uploading bank data to the Controller from an SD card
This command uploads bank data to the Controller from an SD card.
< Command format >
B N K L O A D 1
< Response format >
When processing ends successfully
C R
O K
When processing fails
E R C R
< Explanation of parameters >
Bank No. Specifies the bank No. to upload. (0 to 31)
File name Specifies the file name within eight alphanumeric characters. (An extension is not
required.)
ZFX-C Serial Communication Command Reference
or
C R
Bank No.
(max. 2 digits)
or
C R
File name
Bank No.
(max. 2 digits)
B L 0 C R
Bank No.
(max. 2 digits)
B L 1
About Communication Commands
C R
File name
Bank No.
(max. 2 digits)
21