Omron ZFX-C10 - COMMUNICATION Command Reference Manual page 24

Backing up Bank Data < BNKSAVE command >
Backing up bank data to an external device from the Controller
This command backs up the bank data from the Controller by XMODEM protocol.
< Command format >
B N K S A V E
< File transfer >
The bank data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
R E A D Y C R
When processing ends successfully
C R
O K
When processing fails
E R C R
< Explanation of parameters >
Bank No.
Backing up bank data to an SD card from the Controller
This command backs up bank data to an SD card from the Controller.
< Command format >
B N K S A V E
< Response format >
When processing ends successfully
C R
O K
When processing fails
E R C R
< Explanation of parameters >
Bank No.
File name
22
About Communication Commands
or
0 C R
Bank No.
(max. 2 digits)
Specifies the bank No. to back up. (0 to 31)
C R
1
File name
Bank No.
(max. 2 digits)
Specifies the bank No. to back up. (0 to 31)
The file can be given any name within eight alphanumeric characters. (An extension is not
required.)
B S 0 C R
or
B S 1
ZFX-C Serial Communication Command Reference
Bank No.
(max. 2 digits)
C R
File name
Bank No.
(max. 2 digits)