Command name
IMGSAVE (or IS)
SYSLOAD (or SL)
SYSSAVE (or SS)
Utility Commands
Command name
RESET (or RS)
EXIT
10
About Communication Commands
Description
This command backs up image data to an external device from the Controller.
This command backs up image data to an SD card from the Controller.
This command uploads system data to the Controller from an external device.
This command uploads system data to the Controller from an SD card.
This command backs up system data to an external device from the Controller. p.28
This command backs up system data to an SD card from the Controller.
Description
This command restarts the Controller.
This command ends the TELNET connection for Ethernet communications and
disconnects the line.
ZFX-C Serial Communication Command Reference
Page
p.25
p.26
p.27
p.27
p.28
Page
p.29
p.29