Backup/Restore Commands - Omron ZFX-C10 - COMMUNICATION Command Reference Manual

Backup/Restore Commands

Uploading Bank Group Data < BGRLOAD command >
Uploading bank group data to the Controller from an external device
This command uploads the bank group data to the Controller by XMODEM protocol. The bank group data is
loaded to the specified bank group No.
< Command format >
B G R L O A D 0
< File transfer >
The bank group data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is
not supported.
< Response format >
C R
R E A D Y
When processing ends successfully
C R
O K
When processing fails
E R C R
< Explanation of parameters >
Bank group No. Specifies the bank group No. to upload. (0 to 31)
Uploading bank group data to the Controller from an SD card
This command uploads bank group data to the Controller from an SD card.
< Command format >
B G R L O A D 1
< Response format >
When processing ends successfully
C R
O K
When processing fails
C R
E R
< Explanation of parameters >
Bank group No. Specifies the bank group No. to upload. (0 to 31)
File name Specifies the file name within eight alphanumeric characters. (An extension is not required.)
ZFX-C Serial Communication Command Reference
or
C R
Bank group No.
(max. 2 digits)
or
C R
File name
Bank group No.
(max. 2 digits)
G L 0 C R
Bank group No.
(max. 2 digits)
G L 1
About Communication Commands
C R
File name
Bank group No.
(max. 2 digits)
19