SECTION 3
Connecting External Devices
Linear Sensor Controller Connections
Crimp Terminals and Cables
The terminal blocks use M3 terminal screws.
Use appropriate crimp terminals for M3 screws as shown below. Tighten the terminal screws
securely using a torque between 0.5 and 0.6 N⋅m.
Recommended Model
Forked
6.2mm max.
Round
6.2mm max.
Terminal Names
Reinstall the terminal block protection covers so that the terminal blocks are covered after wiring.
4 to 20mA -5 to 5V
36
Setup Manual
Manufacturer
J.S.T. Mfg Co., Ltd.
J.S.T. Mfg Co., Ltd.
0
Analog output ground connected to input devices.
Analog output terminal for voltage output in the range -5 to 5 V.
Analog output terminal for current output in the range 4 to 20 mA.
Recommended
Model
wire size
V1.25-N3A
1.31 to 1.65 mm
V1.25-MS3
2