Setting Values - Omron NS Manual

Section 8 Testing
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual
8-2-2

Setting Values

Use the following procedure with the test tool to change address values set in functional objects.
Select the address to be changed and double-click on it or click the Set Value Button.
The Set Value Dialog Box will be displayed.
Bit Addresses
Click the SET Button to write 1 to the address.
Click the RESET Button to write 0 to the address.
Word Addresses
Input the value to be written and then click the OK Button.
The symbol will change to
R e f e r e n c e
R e f e r e n c e
Reference
♦ Set Display to Hexadecimal to input BCD formats.
Example:
To input –12 as BCD1 (1-word, signed (most significant digit: F)), input F012.
If Display is not set to Hexadecimal, input the value converted to the required display format.
Example:
To input –12 as BCD1 (1-word, signed (most significant digit: F)), input the converted value –4,078
in INT.
Refer to 2-8 Common Functional Object Functions in the NS Series Programming Manual for de-
tails on storage formats.
♦ The values can also be set from the pop-up menu that is displayed by clicking the right mouse but-
ton in the address list field.
Double-click the
selected item or click
the Set Value Button.
for the address that has had a value changed.
8-7
8-2 Test Tool