Omron NS Manual page 76

Section 3 Manipulating Project Files
NS-Designer Operation Manual
Delete
1. Select the Delete Tab.
2. Sets the project to be deleted.
No. Item
1 Delete Project
3. Click the Execute Button to display the Confirmation Dialog Box. Click the Yes Button to delete the
project.
R e f e r e n c e
R e f e r e n c e
Reference
♦ Projects being edited cannot be deleted. Close the project first, and then retry the operation.
♦ Projects that have been deleted cannot be restored. Check the project carefully before deleting it.
Backup
1. Select the Backup Tab.
2. Set the project to be backed up.
Item
No.
1 Backup
Project
2 Backup To
Set the name of the project file to be deleted as a full path name.
Sets the name of the project file to be backed up as a full path name. When the
NS-Designer is used to open the project, the project file is displayed automatically.
When a floppy disk is selected, the backup file will be saved on the floppy disk. Prepare
the specified number of 1.44-Mbyte floppy disks. When a folder is selected, the backup file
will be saved in the folder. A file is created at the backup destination under the name
[project name].XXX (XXX = 000, 001, ...).
1
Details
1
2
Details
3-14
3-8 Project Maintenance