The Ns-Designer - Omron NS Manual

Appendices
NS-Designer Operation Manual
Item
Opera- Copying screens
tions
Deleting screens
Checking the ON/OFF status of
objects on screens created on

the NS-Designer

Checking addresses set for
functional objects on screens
created on the NS-Designer
Switching labels set for func-
tional objects on screens cre-
ated on the NS-Designer
Checking the settings of func-
tional objects on a list
Finding duplicated settings of
PLC bits and words
Finding setting errors
Displaying objects for which
errors were detected in valida-
tion so that they can be easily
found
Displaying the time and date
Selecting the language used for
the PT's system menus and
dialog boxes
Setting the time and date to
display
Requiring passwords to input
data for functional objects
Displaying a message dialog
box when data is input for func-
tional objects
Making functional objects flash
Select the screen to copy and click the Duplicate Button under
Tools - Screen Maintenance.
Select the screen to delete and click the Delete Button under
Tools - Screen Maintenance.
Use View - Simulate ON/OFF.
Use View - Show Address.
Select the label to display under View - Switch Label.
Switch between labels by selecting Previous Label or Next
Label from the object creation toolbar.
Use Tools - Functional Object List.
Used Tool - Address Cross Reference.
Use Tools - Validation.
Use View - Show Error Object.
Use Functional Object - Date/Time.
Select the language on the Select Language Tab Page of the
Project Property Dialog Box (Settings - Project properties).
1. Create a time/data object (Functional Object - Date/Time).
2. Click the object during PT operation. A dialog box will appear
to set the time and date.
3. Input a new time and date into the dialog box to change the
time and date.
Screen
2000/06/02
2000.06.02
1. Set the passwords under Settings - Password Setting.
2. Turn ON Display Expansion Tab on the Password Tab Page
of the Property Setting Dialog Box and set the level of pass-
word to request.
1. Turn ON Display Expansion Tab on the Write Setting Tab
Page of the Property Setting Dialog Box for the functional ob-
ject and turn ON Display confirmation dialog when writing.
2. Select User Specified Message.
3. Click the Edit Message Button and set the desired message
in the Message Setting Dialog Box.
1. Make the settings for each flicker number under Settings -
Flicker Setting.
2. Turn ON Display Expansion Tab on the Flicker Tab Page of
the Property Setting Dialog Box for the functional object and
set the flicker number.
A-10
Appendix 1 Quick Reference
Procedure Reference
Section 4-2
Section 4-2
Section 4-1
Section 4-1
Section 4-1
Section 4-1
Section 5-9
Section 5-12
Section 9
Section 4-1
Programming
Manual Sec-
tion 2-17
Section 3-9
Programming
Manual Sec-
tion 2-17
Programming
Manual Sec-
tion 2-8
Programming
Manual Sec-
tion 2-8
Programming
Manual Sec-
tion 2-8