Omron NS Manual page 255

Section 10 Transferring Data
NS-Designer Operation Manual
3. Click the Configure Button on the Modem Tab Page and set the modem properties.
Setting Example
Set the following items on the General Tab Page.
No. Field on Gen-
eral Tab Page
1 Data connec-
tion options
2
Make the following settings on the Advanced Tab Page.
Field on De-
No.
tails Tab Page
1 Hardware set-
tings
2
3
R e f e r e n c e
R e f e r e n c e
Reference
♦ If the option to Auto-reset after the transmission is selected, the PT will be automatically reset and
the phone line will be disconnected after transfer has been completed.
1
2
Item
Port speed Set the baud rate of the modem.
Flow control This item enables or disables flow control. Disable flow control.
1
2
3
Item
Data bits Set the data length to 8 bits.
Parity Set the parity to "none."
Stop bits Set 1 stop bit.
10-19
10-1 Transferring Data to the PT
Details
Details