Omron NS Manual page 209

Section 7 System Settings
NS-Designer Operation Manual
♦ When the settings for whether the communications ports are used have been changed, close the
System Setting Dialog Box before setting the host address in $SB or $SW. Until the System Setting
Dialog Box is closed, the settings that existed prior to the changes are still enabled, and the new
host setting cannot be specified in the system memory allocation addresses.
Setting Routing Tables
Click the Routing Table Button on the Comm. All Tab Page to display the Routing Table Setting Dialog
Box.
The routing tables consist of a local network table and remote network table. Routing tables are re-
quired to use messages on a Controller Link Network.
Local PT
Communications path
7-7
7-1 Settings
Commu-
nications
partner