Repeat - Omron NS Manual

Section 5 Object Operations
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual

5-4-10 Repeat

Copies the specified object the specified number of times horizontally or vertically. Functional objects
(including those inside tables or frames) can be repeated with an offset value set for the address.
1. Select the object to be repeated.
If multiple objects are to be repeated at the same time, select all those objects at the same time.
2. Select Edit - Repeat.
The Repeat Dialog Box will be displayed.
3. Make the settings and then click the OK Button.
Example: To set 3 repeats in the horizontal direction at an interval of 8 dots with an offset of
2.
8 dots
Section 5 Object Operations
R e f e r e n c e
R e f e r e n c e
Reference
♦ The repeat function cannot be used for Video Displays and Data Block Tables.
Select the repeat direction.
Specify the number of repeats.
Specify the interval for the repeats.
Specify the offset value to be added to the address for repeats.
8 dots 8 dots
Object repeated 3 times horizontally.
5-24
5-4 Editing