Omron NS Manual page 214

Section 7 System Settings
NS-Designer Operation Manual
When Communications Destination Is Set to Bar-Code Reader:
No. Setting
1 Data Bits
2 Stop Bits
3 Parity
4 Baud Rate
5 BCR Input
6 Continuous
Input
Ethernet
Click the Ethernet Tab.
1
2
3
4
5
6
Select the data bit length for the bar code reader from 7 or 8 bits.
Select the data stop bit length for the bar code reader from 1 or 2 bits.
Select the data parity bits for the bar code reader from none, even, or odd.
Select the baud rate for communications with the bar code reader from 4,800, 9,600, or
19,200 bps.
Select the confirmation method used after inputting data in the input column from the
following options.
Auto: Automatically confirms data when it is read from the bar code reader.
Manual: Confirms data when the Enter Key is pressed. Data and character strings can be
added.
Set whether to move focus to the next object when confirming bar code inputs. This set-
ting can be enabled when BCR Input is set to Auto.
6
1
2
3
4
5
Details
7-12
7-1 Settings