Omron MX2 DEVICENET OPTION BOARD User Manual page 54

Maintenance and Inspection
Step 8
Step 9
Step 10
!Caution
40
Press down on the indicated corner
of the replacement option board
housing to ensure proper connection
of the option board connector
Check that there is
no gap between the
top edges of the
replacement Option
Board and the
Inverter casing.
Secure the replacement
Board in place with the mounting
screw (do not over-tighten).
When replacing an Inverter be sure that all Inverter settings of the Inverter
being replaced are restored to the replacement.
Option
Section 5-3