Omron MX2 DEVICENET OPTION BOARD User Manual page 53

Maintenance and Inspection
Step 4
Step 5
Step 6
Step 7
Unscrew and remove the faulty Option Board grounding cable. Keep the
screw and washers, but set the faulty Option Board aside.
1-phase 200 V 0.1 - 2.2 kW
3-phase 200 V 0.1 - 3.7 kW
3-phase 400 V 0.4 - 4.0 kW
Secure the replacement Option Board grounding cable to the MX2-A@
Inverter using the mounting screw saved in .Unscrew and remove the faulty
Option Board grounding cable. Keep the screw and washers, but set the faulty
Option Board aside.
If removed in Step 3, mount the termi-
nal cover again and tighten the
screw(s).
Push the replacement Option Board
into Inverter to replace the removed
Option Board until it clicks into place
Section 5-3
3-phase 200 V 5.5 - 15 kW
3-phase 400 V 5.5 - 15 kW
39