Advertisement
Quick Links
Digital Fiber Sensors
E3X-DA-S
High functionality digital fiber
amplifier
• High functionality digital fiber amplifier with advanced timing,
LED power control and signal processing functionality
providing highest detection accuracy and stability even for the
most challenging objects and settings.
• Power tuning function to adjust the received light to a
maximum, minimum or pre-defined value
• Auto power and threshold adjustment functions for highest
operational stability
• Two outputs for window monitoring
or two level detections (e.g. object + object state change)
Ordering information
Item
Power
Timer
tuning
Pre-wired
Yes
Fiber amplifier
Yes
*1
connector
M8 con-
3 pin
Yes
nector
4 pin
*1.
Order fiber amplifier connector E3X-CN_ separately
*2.
For fiber amplifiers with these functions and connecting with M8 connector, order the fiber amplifier connector models above and the
pigtail connector E3X-CN21-M3J-2 with 30cm PVC cable and M8 plug.
Fiber amplifier connectors
Shape
Type
Fiber amplifier
connector
Mounting Bracket
Appearance
Model
E39-L143
E3X-DA-S
Function
Auto-
threshold
Twin out-
compensa-
put
tion (ATC)
Yes
Yes
Yes
Yes
Yes
Yes - selectable
Yes
Comment
2 m PVC cable
30 cm PVC cable with M12 plug connector (4 pin)
30 cm PVC cable with M8 plug connector (4 pin)
Quantity
1
Wet
Diffe-
External
process
rential
input
'tough
operation
mode'
Yes
Yes
Yes
Yes
Yes
*2
End Plate
Appearance
Order code
Power
saving 'Eco'
functions
NPN
(display/
LED off)
Yes
E3X-DA21-S 2M E3X-DA51-S 2M
Yes
E3X-DA7-S
E3X-DA13-S
E3X-DA14-S
Order code
E3X-CN21
E3X-CN21-M1J 0.3M
E3X-CN21-M3J-2 0.3M
Model
Quantity
PFP-M
1
PNP
E3X-DA9-S
E3X-DA43-S
E3X-DA44-S
1
Advertisement
Related Manuals for Omron E3X-DA-S
Summary of Contents for Omron E3X-DA-S
-
Page 1: Ordering Information
E3X-DA44-S Order fiber amplifier connector E3X-CN_ separately For fiber amplifiers with these functions and connecting with M8 connector, order the fiber amplifier connector models above and the pigtail connector E3X-CN21-M3J-2 with 30cm PVC cable and M8 plug. Fiber amplifier connectors... - Page 2 Output 1: ON Output 1: ON Output 2: OFF Output 2: ON The two outputs can be used to detect two different light levels Triggering on single or double signal edges Active-threshold control (ATC) Without ATC: malfunction caused by temperature drift, pollution or condensation...
-
Page 3: Specifications
Incident level + threshold or user specific The reverse polarity protection for the pre-wired and fiber amplifier connector models is for the power supply and the output. For M8 connector models the reverse polarity protection is for the power supply. - Page 4 1,800 1,350 E32-T17L 8,000 20,000 20,000 20,000 20,000 The sensing distances with M8 connector models E3X-DA[]3-S and E3X-DA@4-S are approximately 50% of the exemplary values measured with E3X-DA51-S. Reflective Models (Unit: mm) High-resolution High-speed Super-high- Type Tough Mode Standard Mode...
-
Page 5: I/O Circuit Diagrams
Note: 1 . Operation with area settings is as follows: LIGHT ON: ON when the incident level is between the thresholds for channels 1 and 2. DARK ON: OFF when the incident level is between the thresholds for channels 1 and 2. -
Page 6: Safety Precautions
OFF when output is OFF. Use to select SET or RUN Mode. Safety Precautions To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor. • Operation at Power OFF WARNING A pulse may be output when the power supply is turned OFF. Turn... - Page 7 • EEPROM Writing Error insertion marks on the side of the Amplifier Unit, and lower the lock If the data is not written to the EEPROM correctly due to a power fail- lever. ure or static-electric noise, initialize the settings with the keys on the Amplifier Unit.
- Page 8 (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. Amplifier Units Pre-wired Models Operation indicator (1ch) Operation indicator (2ch) E3X-DA21-S E3X-DA51-S Vinyl-insulated round cable Main display Sub-display Standard length: 2 m * Cable Specifications 4-dia., 5-conductor (Conductor...
- Page 9 Operation indicator (1ch) Operation indicator (2ch) E3X-DA7-S E3X-DA9-S Main display Sub-display *1. The Mounting Bracket can With Mounting Bracket Attached also be used on this side. *2. Cable Diameters 3.9 × 3 = 11.7 32.8 E3X-CN21 4.0 dia. 29.8 (4 conductors) 3.9 ×...
- Page 10 E3X-DA44-S Main display Sub display With Mounting Bracket Attached E3X-DA13-S 32.78 3.9x3=11.7 *1. The Mounting Bracket can 29.8 E3X-DA43-S also be used on this side. 15.13 3.9x3=11.7 *2. Connector size B *1 12.15 3.25 Optical communication position M8 *2 Two, 2.4 dia.
- Page 11 Amplifier Unit Connectors Master Connectors 10.7 E3X-CN21 4 dia. 14.4 ±2 ±2 15.1 * E3X-CN21: 4-dia. vinyl-insulated round cable with 4 conductors (Conductor cross section: 0.2 mm , Insulator diameter: 1.1 mm) E3X-DA-S...
- Page 12 This is not intended to be an exhaustive list or reproducing this document in any manner, for any other purpose. of all possible uses of the products, nor is it intended to imply that the If copying or transmitting this document to another, please copy or uses listed may be suitable for the products: transmit it in its entirety.
Need help?
Do you have a question about the E3X-DA-S and is the answer not in the manual?
Questions and answers