Step-by-Step Basic Installation
Step 1
Step 2
Step 3
10
Loosen the screw of the option board
cover, remove the cover and put the
cover aside.
For Inverters up to 4.0 kW only:
loosen the screws of the terminal
block cover and remove the cover to
enable access to the chassis ground
terminal screws.
Secure the Option Board grounding cable to the MX2-A@ Inverter with a
mounting screw.
1-phase 200 V 0.1 - 2.2 kW
3-phase 200 V 0.1 - 3.7 kW
3-phase 400 V 0.4 - 4.0 kW
Section 2-3
3-phase 200 V 5.5 - 15 kW
3-phase 400 V 5.5 - 15 kW