Technical Description (Cylindrical Scrubbing Version); Technical Description (Orbital Versions); Intended Use; Safety - Fimap EMX Use And Maintenance Manual

TECHNICAL DESCRIPTION (CYLINDRICAL SCRUBBING VERSION)

TECHNICAL DESCRIPTION (CYLINDRICAL SCRUBBING VERSION)

TECHNICAL DESCRIPTION (ORBITAL VERSIONS)

TECHNICAL DESCRIPTION (ORBITAL VERSIONS)

INTENDED USE

INTENDED USE
This scrubbing machine was designed and built for the cleaning (scrubbing and drying) of smooth, compact flooring
in the commercial, residential and industrial sectors by a qualified operator in proven safety conditions.
The scrubbing machine is not suitable for cleaning rugs or carpet floors.
It is only suitable for use in indoor (or at least covered) environments.
ATTENTION: the machine is not suitable for use in the rain, or under water jets.
IT IS FORBIDDEN to use the machine in environments with an explosive atmosphere to clean dangerous
powders or flammable liquids. In addition, it is not suitable as a means of transport for people or objects.

SAFETY

SAFETY
Operator cooperation is paramount for accident prevention. No accident prevention program can be effective
without the full cooperation of the person directly responsible for machine operation. The majority of occupational
accidents that happen either in the workplace or whilst moving are caused by failure to respect the most basic
safety rules. An attentive, careful operator is most effective guarantee against accidents and is fundamental in
order to implement any prevention program.
The EMX BTS machine uses the mechanical action of two
cylindrical brushes with the added action of a chemical
solution brought to the brushes through a water system.
The machine can clean a wide range of flooring and
types of dirt, collecting, during its forward motion the dirt
removed and the cleaning solution not absorbed by the
floor. When the machine moves forward, the squeegee
collects the dirt solution from the floor and the suction
system transfers it to the recovery tank. The machine
must only be used for this purpose.
The EMX BTO machine uses the mechanical action of an
abrasive pad with the added action of a chemical solution
brought to the abrasive pad through a water system.
The machine can clean a wide range of flooring and
types of dirt, collecting, during its forward motion the dirt
removed and the cleaning solution not absorbed by the
floor. When the machine moves forward, the squeegee
collects the dirt solution from the floor and the suction
system transfers it to the recovery tank. The machine
must only be used for this purpose.
- 8 -