A Specifications - Omron E5ZE Operation Manual

E5ZE Ratings
Item
Power supply voltage
Allowable power supply range
Power consumption
Sensor inputs
CT inputs
Measurement unit
Max. heater current
Control outputs
Alarm outputs
Memory bank designation input
No. of input control points
Setting method
Indication method
Output operation
Adjustment mode
Auto-tuning
Memory bank
Appendix A
Specifications
24 VDC
85% to 110% of power voltage
15 W + 20% max. at rated voltage
Thermocouple: K, J, R, S, T, E, B, N, L, U, W, PL II
Platinum resistance thermometer:
Pt100, JPt100 (Rated current: 1 mA, 8 points)
E54-CT1 or E54-CT3
0.1 A, 8 points
50 A (single-phase AC)
Voltage output (with short-circuit protecting function)
ON:
OFF:
Max. load current:
Current output
Rated output range:
Max. load resistance: 600 Ω
Cooling control output: 8 points
Temperature alarm: Two points (one for alarm 1 and one for alarm 2) for
total output of each control point
HB alarm (heater burnout detection): One point for total output of each
control point
HS alarm (SSR failure detection): One point for total output of each
control point
Temperature controller error output (memory, set value, or hardware
error): One point
All of the above are NPN open collector outputs
Max. voltage imposition:
Max. load current:
ON residual voltage:
OFF leakage current:
No-voltage contact signal input:
ON contact resistance:
OFF contact resistance:
Transistor open collector input:
ON residual voltage:
OFF leakage current:
8 inputs and 8 control points, 3 memory bank designation inputs
Through communications
No indication. Process values are output through communications.
Direct and reverse operation
ON/OFF control
Hybrid of 2-PID control and fuzzy control
Manual operation
Limit cycle method
No. of banks: 8 for each control point
Designation method: Through communications or using contact input
Specification
12 ± 1.2 VDC
0.5 VDC max.
30 mA DC per point
+0 +2
4 / to 20 / mA
–0.6 –0
30 VDC
50 mA
2 VDC max.
1 mA max.
1 kΩ max.
100 kΩ max.
2 VDC max.
1 mA max.
59