Mounting The Serial Communications Models - Omron E5ZE Operation Manual

Mounting the Serial Communications Models

2-2

Mounting the Serial Communications Models

I/O Units
Communication Unit
E53-E01 for
RS-232C
CT Input Unit
Output Unit
10
I/O Units are not mounted on the E5ZE.
Mount the appropriate I/O Units according to the specification of the E5ZE.
The diagram below is the view from the back of component side.
Type of I/O Units
E54-E8CT
Use this CT input unit in combination
with the E53-E8Q voltage output unit.
E53-E8Q for voltage
output
Tighten the screws through the holes marked with a black dot (
studs of the E5ZE.
Mounting Position of I/O Units
Communication Unit
or
or
CT Input Unit
Output Unit
Remove this screw when the Unit is
mounted on the model with casing.
Section
E53-E04 for
RS-422/RS-485
E53-E8C for current
output
) to the fixing
F
Connector
Communication
Unit
CT Input Unit
Connector
Output Unit
Connector
2-2