Outputs - Omron E5ZE Operation Manual

Wiring CT Inputs and Control/Alarm Outputs

2-6-2 Outputs

Cable Connections
CONTROL Connector
Wiring
E5ZE-CBLjjj
Connecting Cable
The CONTROL connector can be connected to an XW2B-20G5 Connector Ter-
minal Conversion Unit (20-terminal M3.5 terminal block) or an XW2B-20G4
Connector Terminal Conversion Unit (20-terminal M2.4 terminal block).
• The terminal arrangement for outputs when an XW2B-20G5/4 Connector Ter-
minal Conversion Unit is connected is shown in the following diagram.
CONTROL Connector Terminal Block
2
1
2
2
2
0
• The output specifications are shown in the following table. Connect a load that
is compatible with the output type and output rating.
Output
Voltage output
Current output
XW2B-20G5/4 Connector Terminal
Conversion Unit
Heating control output, memory bank designation input
XW2B-20G5/4 Connector Terminal
Conversion Unit
G7TC-OC08/16, G7VC-Oj16
I/O Blocks
Cooling control output, ALM1 and ALM2, HB alarm,
HS alarm, temperature controller error
Output voltage:
Output current:
Output current:
Load resistance: 600 Ω max.
Section
Specification
12 ± 1.2 VDC
30 mA max.
+0 +2
to
4 / 20 / mA DC
–0.6 –0
2-6
21