Omron E5ZE Operation Manual page 13

Main Functions
Control Adjustment
Heater Burnout and SSR
Failure Detection
Control Method Selection
Memory Banks
6
PID and fuzzy constants can be set by executing auto-tuning (AT). If an offset
occurs during P or PD control, manual adjustment is possible using the manual
reset function. Temperature turbulence caused by external disturbances can be
suppressed and controlled using the fuzzy function.
Output short circuits caused by heater burnout or SSR failure can be detected.
Control can be switched between ON/OFF control and the normal 2-PID control
(with 2 degrees of freedom). Manual operation is also possible.
The memory banks store different sets of set values for the control points. There
are 8 memory banks for each control point. Memory banks allow the set values
for a control point to be changed as a group rather than resetting them individu-
ally. Use the external contact inputs or communications to designate the re-
quired memory bank.
Section 1-3