Table of Contents
Advertisement
Operating Guide | iC7-Marine PROFINET
Parameter Access
5
Overview
5.1
iC7 series supports access to parameters via Base Mode Parameter Access. The data mechanism transmits requests and replies acyclically.
The requests and replies are transmitted by the Acyclic Data Exchange mechanism.
For detailed instructions on how to access parameters, refer to the documentation provided by the PLC manufacturer.
PROFIdrive Parameter Numbers
5.2
PROFIdrive specifies a list of standard PNUs and maps them to the areas defined in
to the latest version of the PROFIdrive standard.
The iC7 series supports all mandatory PNU objects and some optional and the device-specific parameter access range. The PROFIdrive
parameters are not accessible via MyDrive® Insight or the control panel.
Table 20: Supported PNUs
PNU
922
923
944
947
950
964
965
972
974
975
976
977
980–989
60000
61000
61001
61002
61003
61004
Danfoss Drives Oy © 2024.04
Description
Telegram selection
List of all parameters for signals
Fault message counter
Fault number
Scaling of the fault buffer
Drive unit identification
Profile identification number
Drive reset
Base mode parameter access service identification
Drive object identification
Load device parameter set
Transfer in non-volatile memory (global)
Number list of defined parameters
Velocity reference value
NameOfStation (read only)
IpOfStation (read only)
MacOfStation (read only)
DefaultGatewayOfStation (read only)
SubnetMaskOfStation (read only)
Table
20. For more details on PROFIdrive PNUs, refer
AQ481922043454en-000101 / 172K4282A |
35
Advertisement
Table of Contents
Need help?
Do you have a question about the iC7-Marine PROFINET and is the answer not in the manual?
Questions and answers