Setting Up The Curingpen; Install The Light Source Head; Install The Disposable Sleeve; Install The Protective Light Shield - Eighteeth CuringPen User Manual

4. Setting up the CuringPen

4.1 Install the light source
head
Make sure the light source head
align to the slots of the handpiece.
Push gently until there is a "click"
sound which indicates that the light
source head is securely installed
into the handpiece.
The light source head can be 360
degrees rotated without being taken
off, which makes it easy to watch
the LCD during the treatment.

Only the original light
source head can be used.
Check the light source
head
before installation. Do not
use damaged light source
head and handpiece.

After installing the light
source head, pull it gently
to make
connection
otherwise, it may cause
unexpected
hurt the patients.
4.2 Install the disposable
sleeve
Apply a disposable sleeve over the
entirety of the light source head
4 Setting up the CuringPen
and handpiece
sure
is good,
fault, even
and handpiece before beginning a
procedure.
4.3 Install the protective
light shield
Make sure the light source head
align to the slots of the protective
light shield, plug them together.

Disposable sleeves must
be discarded after each
use.

The light source head,
protective light shield and
handpiece
cleaned and disinfected
the
after each treatment.
Avoid direct exposure of the lamp to
the eyes during working.
should be
Page 8 / 28