Handpiece Operation - Eighteeth CuringPen User Manual

7.2 Handpiece operation

7 Operation
Turn on the device and select one
mode. Press
intensity output, and the time will
start counting down. Press any key
to stop the output during the light
intensity output.
There is a beep every 5s while
working,
automatically turned off after the
countdown ends.




to start the light
and the
When the
working, do not directly
illuminate the
otherwise it will cause
injury.
The maximum surface te
mperature of the light sou
rce can reach 55 ℃ or hig-
her during use,
directly illuminate
skin, otherwise
temperature burns may
occur.
To prevent the lamp from
overheating,
device is
continuously for 10 times
at 2300mW/cm
prohibited to
highest light
output within 1 minute.
When using,
should be
irradiated onto the curing
dental resins
composites
improper exposure.
output is
device is
eyes,
do not
the
high
after the
used
2
, it will be
use the
intensity
the light
directly
and
to avoid
Page 14 / 28