Operation Mode - Eighteeth CuringPen User Manual

7 Operation

7.3 Operation mode

Standard mode
In these three modes, the light intensity can
be set to 2300mW/cm² , 1500mW/cm² or
1000mW/cm² .
Wavelength：380nm-515nm
When is pressed, the set light intensity
M0、M1、M2
is output immediately, and there is a sound
prompt every 5 seconds.
Ramp Mode
Light intensity: 1000mW/cm² 。
Wavelength: 380nm-515nm
When pressed, the light intensity
2
gradually increases to 1000mW/cm in the
first 5 seconds, and then continues to
RAMP
2
output 1000mW/cm . There is a sound
prompt every 5 seconds.
PULSE Mode
Light intensity: 1000mW/cm²
Wavelength: 380nm-515nm
When is pressed, the output light
2
intensity is 1000mW/cm and flashes once
every 1 second. There is a sound prompt
PULSE
every 5 seconds.
light intensity
100%
Time
Page 16 / 28