Vertical Installation Inside Masonry Chimney; Outside Vertical Installation - J. A. Roby FORGERON CLASSIQUE Instruction Manual

Table of Contents

Advertisement

Vertical Installation Inside Masonry
Chimney
The appliance must be installed in accordance with the
applicable local laws or the standards such as ULC-S635, ULC-
S640. Follow the chimney manufacturer's instructions to install
the chimney.
For safety install a stainless-steel liner inside the masonry
chimney. The masonry chimney flue must be greater than the
liner. The liner must have the same diameter than the appliance
and a cleaning access (see maintenance section in manual)
The chimney connector (flue pipe) shall not pass through an
attic or roof space, closet or similar concealed space, or a floor,
or ceiling. Where passage through a wall, or partition of
combustible construction is desired, the instructions shall
require that the installation conform to CSA B365, Installation
Code for Solid-Fuel-Burning Appliances and Equipment.
PR_I028/2023-08-08-EN

Outside Vertical Installation

The appliance must be installed in accordance with the
applicable local laws or the CAN/CSA-B365. Follow the
chimney manufacturer's instructions to install the chimney.
Revision : 10
26

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FORGERON CLASSIQUE and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents