Table of Contents
Advertisement
5.3
Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specifi ed intervals:
Part
Display console
Lubrication of the
moving parts
Plastic covers
Screws and cable
connections
Legend: C = clean; I = inspect
Lubrication of the chain
Lubricate the chain at least every six months or even better after approx. 50 operating hours. Use a
non-fraying cloth as well as 20W motor or multi-purpose oil. Drop approx. one teaspoon of the oil on
the cloth. Then pull out carefully the chain on the handle to the fence. Wipe along the chain with the
cloth several times. Then remove the remaining oil with a dry cloth.
Cleaning the rail
Before the training, wipe the rail with a damped cloth to remove any dust.
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be
obtained from your local authority's recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
36
Weekly
Monthly
C
I
C
I
I
Quarterly
Half-yearly
ROW-X PLUS
Yearly
I
Advertisement
Table of Contents
Need help?
Do you have a question about the ROW-X PLUS and is the answer not in the manual?