Settings For The Measurements; Select, Modify Or Create Product (Measurement Settings) - Inficon ELT Vmax Translation Of The Original Operating Instructions

INFICON

6.3 Settings for the measurements

6.3.1 Select, modify or create product (measurement settings)

ELT Vmax Operating-instructions-minc98en1-01-(2405)
For setting measurement specifications you need a product that has been created.
If you change the parameters such as the setpoint via an external controller, "No
Product" is shown on the display.
ü
Operator or Supervisor rights
1 > Products
ð Existing products are displayed as a list.
2 Press a product name and choose from the displayed tool-bar or from the
display:
, to load a product.
, to modify product settings.
The window "Product Settings" will open.
, to copy product settings.
The "Product Settings" window opens with the entries of the copy
source.
, to delete a product.
A confirmation screen appears.
, to create a new product.
The window "Product Settings" opens.
3 Click on "Settings" / "Product" to open the "Product settings" window. In this
case, enter under "Product Name" a product name as required, change it or
keep it.
Operation | 6
29 / 50