Table of Contents
Advertisement
Section 10
K-Link
NOTE: Ensure that the system time of the computer running the K-Link software and the
system time of the G210 have both been set to the correct time before proceeding.
NOTE: To ensure a stable connection between K-Link and the G210, it is recommended
that the G210 be configured with a static IP address. Consult your IT department for IP
configuration settings specific to the network being used.
NOTE: After pressing "Start", the device connection window will disappear, and the main
window will appear. However, it can take up to 1 minute before any graph can be seen.
Measurement Section
The measurement section displays the measurements retrieved from the device every
30 seconds, the connection status of the device, a setting to enable or disable email
notifications if an alarm is triggered, and an "Open Log" button to explore the folder containing
the file where the logs are being saved.
Alarm Display Section
The alarm section displays the status of the alarms. When an alarm is activated on the
device, the associated alarm in K-Link will change colour to red. When the alarm is no longer
10
activated on the device, the associated alarm in K-Link will change colour back to green.
K-Link refreshes the alarms every 5 seconds.
36
Advertisement
Table of Contents
Need help?
Do you have a question about the G210 InviCell and is the answer not in the manual?
Questions and answers