Table of Contents
Advertisement
Section 9
Settings
Alarm
A flashing red light alarm button indicates that an alarm has been activated. An audible alarm
will also be activated. Press the alarm button to open the alarm message box.
9
CAUTION: Do not use the incubator if an alarm is triggered and the cause of the
failure has not been corrected.
34
1
The alarm box shows information about
the current alarm. Press Mute (1) to turn
off the audible alarm.
The alarm will be activated:
•
If the chamber temperature is too
high or too low.
•
If the gas concentrations are too high
or too low.
•
If there is a CO
or O
2
•
When there is a hardware error.
The unit is equipped with an external alarm
connector which can be connected to a
monitoring device. The connector can be
connected to either a voltage source or a
current source.
Errors
In the case of a hardware error, a message
and an error code will be shown.
For more information about alarms, see
"Section 11 - Troubleshooting" on page
41.
sensor failure.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the G210 InviCell and is the answer not in the manual?
Questions and answers