Chapter 1: Operation & Maintenance; Getting Started; Calibration Requirements; Normal Operation - Raytheon ST60 Owner's Handbook Manual

Chapter 1: Operation & Maintenance
Chapter 1: Operation & Maintenance

1.1 Getting started

This handbook describes how to operate, maintain and install the
Raytheon ST60 Club House Wind instrument. This instrument shows
the wind speed and direction.

Calibration requirements

Your ST60 instrument is calibrated to factory (default) settings when
first installed and must therefore be calibrated before use, in
accordance with the procedures in Chapter 3, Calibration.

1.2 Normal operation

The information on the ST60 Club House Wind instrument is
presented by a pointer and a digital display.

Pointer

The pointer shows the wind direction.

Digital display

The digital display normally shows the wind speed in either knots or
metres per second. You can use the
(see the Normal operation flow chart), displayed as follows:

• Beaufort wind speed.

• Maximum wind speed.

• Maximum wind speed alarm.
• Minimum wind speed alarm.
Beaufort wind speed
The appropriate Beaufort wind 'force' number, up to F12.
Maximum wind speed
The maximum wind speed is reset at power up and can also be reset
manually by pressing the > key for 3 seconds.
key to select other information
1