Chapter 2: Installation
Power supply cable
Cable from Wind Vane
Connections to ST60 Club House Wind instrument
Power supply connections
The ST60 Club House Wind instrument requires a 12 V dc power
supply capable of providing at least 2 A and protected by a 0.5 A fuse.
Power cables are available in 2 m and 9 m lengths.
To fit a power cable:
1. Run the cable from the instrument to a suitable 12 V dc power
source.
2. If the cable has not already been trimmed at the power supply end:
a. Cut the cable to length and trim back an appropriate amount
of the outer sheath.
b. Cut back and insulate the yellow wire.
0.5 A fuse
12 V dc
supply
Power connections for ST 60 Club House Wind instrument
Red
Screen
15
Screen
Yellow
Blue
Green
Red
D4511-1
D4310-5