8
There must also be a viable route for the transducer cable to be routed
to the instrument.
Note: As you will need to manually rotate the Wine Vane as part of the
linearisation procedure, do not actually fit it in position yet.
Instrument
Instrument
Instrument
Instrument
Instrument
CAUTION:
The presence of moisture at the rear of the instrument could cause
damage either by entering the instrument through the breathing
hole or by coming into contact with the electrical connectors.
Each instrument must be positioned where:
• It is protected against physical damage.
• It is at least 500 mm (20 in) from radio receiving equipment.
• There is reasonable rear access for installation and servicing.
With standard
bezel
110mm (4.33in)
With low
profile bezel
123mm (4.85in)
ST60 Club House Wind Instrument Owner's Handbook
6.2mm
(0.25in)
24mm
15mm
(0.95in)
(0.6in)
35mm
(1.4in)
D4506-1