Boat Show Mode (Bso); Factory Reset (Fo) - Raytheon ST60 Owner's Handbook Manual

Chapter 3: Calibration

Boat show mode (bSO) ) ) ) )

Factory reset (FO)

CAUTION:
Do NOT enable this mode. It must only be used for demonstration
purposes.
Ensure that the Boatshow Mode is set to bS0 (disabled). If necessary,
press the < < < < < or > > > > > key to achieve this.
You can use this screen to reset the operating parameters to the factory
default values. If you want to apply the factory defaults, ensure the
display shows F1. If you want to retain the values you have set up,
ensure that the display shows F0. Use the < and > keys to make the
required selection.
The values you have selected will be applied when you exit this screen.
23