Mounting Options; Parts Supplied - Raytheon ST60 Owner's Handbook Manual

iv

Mounting options

If you do not want to surface mount your ST60 instrument, options are
available for:
• Flush mounting. If you have ordered the flush mounting option a
• Bracket mounting.

Parts supplied

Unpack your ST60 instrument and check that the following items are
present:
Spare spade terminals are also provided, to re-terminate transducer
cables if they have to be cut to facilitate installation.
Note: The above packing list is for an ST60 Wind system.
low-profile bezel and four fixing screws are also provided.
• Item 1, ST60 Club House Wind instrument, fitted with
standard bezel for surface mounting.
• Item 2, Fixing studs (2).
• Item 3, Thumb nuts (2).
• Item 4, Gasket.
• Item 5, Wind Vane.
• Item 6, Power cable.
• Item 7, Instrument Cover.
• Item 8, Junction Box.
• Item 9, Owner's Handbook. A Warranty document and fitting
templates are included in this Handbook.
• Item 10, Worldwide Service Centre Handbook.
ST60 Club House Wind Instrument Owner's Handbook