System Specifications; Vpap Auto 25, Vpap St, Vpap S - ResMed VPAP Auto 25 Service Manual

9

System specifications

VPAP Auto 25, VPAP ST, VPAP S

Operating pressure range:
Maximum single fault pressure:
Pressure measurement tolerance:
Flow measurement tolerance:
VAuto mode:
S, ST and T mode:
CPAP mode:
DECLARED DUAL -NUMBER NOISE EMISSION VALUES in accordance with ISO 4871:
Sound pressure level:
Sound power level
Dimensions (LxWxH):
Weight:
Power supply:
Housing construction:
Operating temperature:
Operating humidity:
Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity:
Operating altitude:
Electromagnetic compatibility:
Air filter:
Air tubing:
Air outlet:
IEC 60601-1 classification:
Note: The manufacturer reserves the right to change these specifications without notice.
50 VPAP™ Service Manual
3 to 25 cm H 2 O
40 cm H 2 O
± 0.5 cm H 2 O ± 4% of the measured reading
± 0.1 L/sec or 20% of reading, whichever is greater
4 to 25 cm H 2 O (measured at the mask); Min EPAP: 4 cm H 2 O; Max IPAP:
25 cm H 2 O; Pressure support: 0 to 10 cm H2O
IPAP: 4 to 25 H 2 O (measured at the mask); EPAP: 3 to 25 cm H 2 O
(measured at the mask)
4 to 20 cm H 2 O (measured at the mask)
26 dBA with uncertainty of 2 dBA as measured according to ISO17510-
1:2002
28 dBA with uncertainty of 2 dBA as measured according to ISO17510-
1:2007
36 dBA with uncertainty of 2 dBA as measured according to ISO17510-
1:2007
4.4" x 6.5" x 5.7" (112 mm x 164 mm x 145mm)
2.9 lb. (1.3 kg)
Input range 100-240V, 50-60 Hz, 40VA (typical power consumption),
100VA (maximum power consumption
Flame retardant engineering thermoplastic
41° F to 95° F (+5°C to +35°C)
10%-95% non-condensing
10%-95% non-condensing
Sea level to 8500' (2600 m)
Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential, commercial
and light industry environments.
Two layered, powder-bonded, polyester non-woven fibre
Flexible plastic, 1 x 6'6" (2 m)
The 22 mm conical air outlet complies with EN ISO 5356-1
Class II (double insulated), Type CF
<