Input Setting; Input Line Operation Selection - Panasonic HL-G2 Series User Manual

4.6 Input Setting

4.6 Input Setting

■
Overview
This is a function setting related to input operation.

4.6.1 Input Line Operation Selection

This function allows you to select a combination of signals to be input to external IN1, IN2, and
IN3 from five types.
Zero setting
Zero point adjustment can be made.
For details, refer to
Measured value resetting
When a reset signal is input, measured values, calculated values, and other values are reset.
For details, refer to
Trigger
If a trigger signal is input, the measured value is held while the signal is being input.
For details, refer to
Bank A / B
The contents of each bank can be read by combining bank A input and bank B input.
For details on the combination of each bank input, refer to "Bank A / Bank B input" in
line operation".
Laser stop
While a laser stop signal is being input, laser radiation is stopped.
Teaching
When a teaching signal is input, teaching is performed on the sensing object.
External input setting combinations are shown below.
External input
Trigger / Zero setting / Measured value
resetting
(Trg / Zero / Reset)
Trigger / Zero setting / Laser stop
(Trg / Zero / Laser)
Trigger / Bank A / Bank B
(Trg / Bank)
Teaching / Bank A / Bank B
(Teach / Bank)
Zero setting / Bank A / Bank B
(Zero / Bank)
4-52
"4.10 Zero Setting".
"4.11 Measured Value
"4.6.3 Trigger Mode".
Zero setting
Resetting".
Input signal combinations
IN1 (Pink) IN2 (Purple)
Trigger Zero setting
Trigger Zero setting
Trigger
Teaching
IN3 (Pink / Purple)
Measured value
resetting
Laser stop
Bank A
Bank A
Bank A
WUME-HLG2AN-2
"Input
Bank B
Bank B
Bank B